The Weller WE1010 and the Hakko FX-888D are two of the most popular mid-range soldering stations for hobbyists and repairers. Both are a big step up from a basic plug-in iron, both come from long-established brands, and both are good choices for retro computer and console work. But they are designed quite differently, and one may suit you better.
This comparison uses the manufacturers’ published specifications. Prices change often, so use the links to check current prices.
Specifications compared
| Specification | Weller WE1010 | Hakko FX-888D |
|---|---|---|
| Station power | 85W | 70W |
| Iron power | 70W | 65W |
| Temperature range | 100–450°C | 50–480°C |
| Temperature stability | ±2°C | ±1°C |
| Tip series | Weller ET | Hakko T18 |
Weller quotes a heat-up time of around 28 seconds from 50°C to 350°C for the WE1010.
Design and controls
The Weller WE1010 has a simple three-button interface and a clear display. It includes a standby feature that drops the temperature when the iron is left in the stand, and it can be password-locked, which is useful in shared workshops or schools. The iron is light and comfortable for long sessions.
The Hakko FX-888D has a compact station with a two-button interface and a digital display. It offers preset temperatures and a calibration offset, though setting it up can feel fiddly until you are used to it. It uses a ceramic heater and is often praised for its quick temperature recovery and the very wide choice of T18 tips.
Tips and running costs
Tips matter more than most people expect. You will wear them out over the years, and having the right shape for each job makes soldering easier.
- Weller ET tips are widely available in conical, chisel and screwdriver shapes. Search Weller ET tips.
- Hakko T18 tips come in a very large range, from fine conical to bevel and knife tips. Search Hakko T18 tips.
For most retro repair work, a 1.6mm to 2.4mm chisel tip is the best all-rounder. Our guide to the best soldering iron tips for circuit boards explains which shapes to use when.
Performance on retro electronics
Retro boards bring a mix of jobs: replacing through-hole capacitors, desoldering chips, soldering ground planes, and the occasional surface-mount job. Both stations handle all of these.
- On large ground planes and big connectors, the Weller’s higher station power helps it recover quickly.
- For fine work, the Hakko’s tighter stated temperature stability and its range of fine tips make it a favourite.
- Both can be set to typical leaded solder temperatures of around 320–350°C and higher for lead-free solder.
If you mainly do surface-mount work, see our guide to the best soldering station for surface-mount components; you may also want hot air.
Pros and cons
Weller WE1010
- Higher station power for heavy joints.
- Standby and lockout features.
- Simple, clear controls.
- Narrower temperature range than the Hakko.
Hakko FX-888D
- Tighter stated temperature stability.
- Huge choice of T18 tips.
- Compact station.
- Controls can be less intuitive at first.
Which should you buy?
Both are excellent, and you will not regret either for retro repair. Choose the Weller WE1010 if you want simple controls, standby and lockout features, and plenty of power for larger joints. Choose the Hakko FX-888D if you value a huge range of tips and the tightest temperature control.
Check the current prices of the Weller WE1010 and the Hakko FX-888D. If neither fits your budget, see our guide to the best budget soldering stations or our professional soldering iron guide.
Getting the best from either station
- Start at around 330°C for leaded solder and raise it only if joints are slow to flow. Higher temperatures oxidise tips faster and can lift pads on old boards.
- Keep the tip tinned. Add a little solder before you put the iron back in its stand, and before switching off.
- Wipe the tip on brass wool rather than scraping it, and never file a plated tip.
- Use a tip big enough for the joint. A fine tip on a large ground plane needs more temperature and takes longer, which is harder on the board.
- Use flux generously on old, oxidised joints. Our guide to the best flux for soldering covers the options.
Accessories worth adding
- Brass wool tip cleaner instead of a wet sponge, which can shock the tip.
- Tip tinner to revive oxidised tips.
- Good-quality solder and flux; see our guide to the best solder for vintage electronics.
FAQ
Is the Weller WE1010 better than the Hakko FX-888D?
Neither is better for every job. The WE1010 has more station power and standby and lockout features; the FX-888D has tighter stated temperature stability and a wider tip range.
Can I use Hakko tips on a Weller WE1010?
No. The WE1010 uses Weller ET tips and the FX-888D uses Hakko T18 tips. They are not interchangeable.
What temperature range do they cover?
The Weller WE1010 covers 100–450°C and the Hakko FX-888D 50–480°C, according to their makers.
Are these stations good for retro computer repair?
Yes. Both handle through-hole and most surface-mount work on retro boards, including recapping and chip replacement.